FINISHING

AUX 9011

Product Review: AUX 9011 is an organic cross-linker with excellent features for all polymers emulsions Product Characteristics: Physical state Dense Liquid Active Substance 100 % pH (1:10) 10 Charge Anionic Benefits: • AUX 9011 has excellent reactivity for all polymers emulsions, such as acrilyc, polyurethane and buthadienic resins. • AUX 9011 when used in covering solutions or in final urethane top-coats after 48 hours it gives excellent and permanent physical resistances to finishings. • AUX 9011 increases greatly wet and dry rub fastness of finishings.

Application: Suggested amount of usage is 1-2% based on the total weight of binders in the solution. The mixture has 12 hours pot-life, so after 12 hours the mixtures should be re-prepared. Particular attention should be put during embossing and plating, in order to avoid adhesion problems. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C. Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

AUX 9090

Product Review: AUX 9090 is a mixture of particular solvents in order to ensure the penetration of dyes. Product Characteristics: Physical state Clear Liquid Active Substance 100 % Benefits: • AUX 9090 has a high penetration power. • AUX 9090 has a very good leveling effect for the colors • AUX 9090 can be applied on to crust leathers if they have absorption problem.

Application: When spraying solvent/water based anilines on to leathers, in finishing mixtures in order to ensure the penetration of mixture in the leather. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

PRK 5025

Product Review: PRK 5025 is a medium hard cationic protein. Product Characteristics: Physical state Yellowish liquid Active Substance 11 % ±1 pH 4 ± 0,5 Benefits: • PRK 5025 can be used in finishing phases to improve the gloss grade, the naturalness and the dry rubbing resistance. • PRK 5025 increases the polish and press performance of finishing.

Handling & Storage: Between 5ºC and 35ºC

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

PRO 5001

Product Review: PRO 5001 is a medium hard protein gloss particularly suitable for plate final gloss and for all glazed finishings. Product Characteristics: Physical state Amber viscous liquid Active Substance 12 % ±1 pH 7 ± 0,5

Benefits: • PRO 5001 can be used in all finishing phase to improve the gloss grade, the naturalness and the dry rubbing resistance. • PRO 5001 is easily fixable with formaldehyde. Handling & Storage: Between 5ºC and 35ºC

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

COMPACT 1030

Product Review: COMPACT 1030 is a water based fillers, acrylic and polyurethane polymers Product Characteristics: Physical state White liquid Active Substance 32 % pH 9

Benefits: • COMPACT 1030 is a ready-to-use basecoat compound suitable for buffed cow leather for shoe upper brush-off articles. • COMPACT 1030 gives very good coverage and has high dry and wet flex resistance. Application: Due to its excellent spreadability, the best application is by roller coater machine after having added some pigments and adjusting the viscosity. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

LAC 7016

Product Review: LAC 7016 is a water emulsion of nitrocellulose. Product Characteristics: Physical state White liquid Active Substance 16 %

Benefits: • LAC 7016 is a water emulsion of nitrocellulose. • LAC 7016 gives good gloss. • LAC 7016 has good dry and wet resistance. • LAC 7016 is suitable for upholstery, leather goods and garment. Application: In final 1:1 or 1:2 with water. If more gloss level is required, it can be diluted with water-mixable solvents. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

OIL 6021

Product Review: OIL 6021 is a mixture of synthetic and natural oils with emulgators. Product Characteristics: Physical state Yellow liquid Active Substance 100 % pH 9

Benefits: • OIL 6021 is oil with excellent grain lubricating effect on leather. • OIL 6021 gives very good wetting on whole surface, excellent adhesion of finishing films and allow to obtain great results on polish and glaze machine. • OIL 6021 can be used either on roller coat or on spray. • OIL 6021 gives a slight PULL-UP effect on leather. Application: Can be combined alone or with special waxes in order to regulate the softness of the articles and desired effects. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

PRO 5021

Product Review: PRO 5021 is a modified casein binder. Product Characteristics: Physical state Amber viscous liquid Active Substance 8 % ±1 pH 8 ± 0,5

Benefits: • PRO 5021 can be used in all finishing phase to improve the gloss grade, the naturalness and the dry rubbing resistance. • PRO 5021 is easily fixable with formaldehyde. • PRO 5021 improves the grain sealing without affecting the natural look. • PRO 5021 decreases the stickiness of the finishing films thus give a better performance on plate. Handling & Storage: Between 5ºC and 35ºC

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

PRO 5073

Product Review: PRO 5073 is a modified casein binder. Product Characteristics: Physical state Viscous liquid Active Substance 17 % ±1 pH 8 ± 0,5

Benefits: • PRO 5073 gives a medium soft, bright film. • PRO 5073 is easily fixable with formaldehyde. • PRO 5073 is a product of general use from pre-ground to final bright both polished or ironed leather. • PRO 5073 reduces the thermo plasticity of the finishing films thus give a better performance on plate. Handling & Storage: Between 5ºC and 35ºC

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

RAC 3014

Product Review: RAC 3014 is an acrylic co-polymer solution. Product Characteristics: Physical state Slight yellowish liquid Active Substance 20 % pH 8

Benefits: • RAC 3014 is a finely dispersed self-crosslinking acrylic binder which gives very light and low covering finishing. • RAC 3014 has very good flexometer and dry and wet rubbing fastness. • RAC 3014 improves adhesion to the leather. Application: General application is 50 – 200 gr/lt. Handling & Storage: Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

RAC 3017

Product Review: RAC 3017 is an acrylic co-polymer solution. Product Characteristics: Physical state Slight yellowish liquid Active Substance 35 % pH 8

Benefits: • RAC 3017 is a very special acrylic binder with high cold resistance. • RAC 3017 gives a medium soft film with moderate elasticity. • RAC 3017 gives excellent dry and wet flexion performance • RAC 3017 has excellent performance on dry milling. • RAC 3017 is particularly useful for shoe-upper and upholstery items on full grain or buffed leathers. Application: General application is 50 – 200 gr/lt. Handling & Storage: Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

RAC 3244

Product Review: RAC 3244 is polyacrylate solution. Product Characteristics: Physical state White liquid Active Substance 40 % pH 8

Benefits: • RAC 3244 is a finely dispersed polyacrylate solution. • RAC 3244 is especially developed for the impregnation of corrected grain leathers. • RAC 3244 has a very good and fast penetration into the fibers of the leather. • RAC 3244 gives the leather good fullness and tightness together with a soft touch. • RAC 3244 improves adhesion to the leather. Application: General application is 300 – 400 gr/lt. Handling & Storage: Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

TAC 8020

Product Review: TAC 8020 is a cationic water emulsion of silicone. Product Characteristics: Physical state White liquid Active Substance 10 % pH 4

Benefits: • TAC 8020 gives warm touch. • TAC 8020 could be used in cationic mixtures in order to support handle and also covering of the following coats. • TAC 8020 fixes itself very well to the finishing so gives permanent touch. • TAC 8020 can also be added to final lacquer emulsions. Application: Depending on the desired article it can be added from 5 - 20 gr/lt. Handling & Storage: Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

TAC 8030

Product Review: TAC 8030 is a non-ionic water emulsion of silicone. Product Characteristics: Physical state White liquid Active Substance 30 % pH 5

Benefits: • TAC 8030 gives slippery, talcum touch. • TAC 8030 is recommended to be used in garment, nappa, upholstery articles • TAC 8030 could be used in all anionic mixture from pre-base to final coats. • TAC 8030 when used in lacquers supports the rub resistances. • TAC 8030 gives a permanent touch to aqueous tops or lacquer emulsions. Application: Depending on the desired article it can be added from 1- 2 %. Handling & Storage: Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

TOP FIX

Product Review: TOP FIX is a water-based bright glossy top-coat, which gives to the treated leather a pleasant silky touch. Product Characteristics: Physical state Whitish dense liquid Active Substance 19 % pH 8

Benefits: • TOP FIX gives a bright glossy look when applied in final coat. • TOP FIX is the ideal product especially for embossed articles that is going to be applied silicone paper or carteggio. • TOP FIX has very good embossing and dry milling properties. Application: General application is 1:1.5 with water. If more resistances are desired, should be supported with 1% of AUX 9011. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

URK 4014

Product Review: URK 4015 is a cationic aliphatic polyurethanes Product Characteristics: Physical state Transparent liq Active Substance 20% ± 2 pH 4 approx Charge Cationic

Benefits: • URK 4014 forms a very elastic, sticky film. • URK 4014 is recommended for leveling leathers with defects of blind grain or excessive absorption.. . Application: We recommend to use URK 4014 on any kind of article to achieve a natural look and a re-bright effect. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

URK 4015

Product Review: URK 4015 is a cationic aliphatic polyurethanes that is very soft non-film forming PU for polished finishings. Product Characteristics: Physical state Transparent liq Active Substance 20% ± 2 pH 4 approx Charge Cationic

Benefits: • URK 4015 is a polishable PU especially for full grain leathers. • URK 4015 gives to the leather a good adhesion, a natural look. . Application: We recommend to use URK 4015 on any kind of article to achieve a natural look and a re-bright effect. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

URT 4018

Product Review: URT 4018 is a aliphatic urethane solution. Product Characteristics: Physical state White liquid Active Substance 30 % pH 8

Benefits: • URT 4018 gives medium hard, tight, glossy film. • URT 4018 gives water drop resistance to finishings. • URT 4018 can be used both in covering phases also in top coats. Application: The recommended usage is from 50 – 200 gr/lt. The resistances can be increased by adding 1% of crosslinker. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

URT 4022

Product Review: URT 4022 is an aromatic binder to improve the adhesion of the finishings. Product Characteristics: Physical state Semi-tansparent liq Active Substance 18 ± 2 pH 10 approx Charge Anionic

Benefits: • URT 4022 gives excellent adhesion properties on every type of leather. • URT 4022 is specially designed for basecoats to improve adhesion on difficult leathers especially waxy, oily applications. Application: We recommend to use URT 4022 with water and glycols as 100 gr URT 4022 200 gr water 200 gr Ethyl Glycol Handling & Storage: Between 5ºC and 35ºC

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

URT 4075

Product Review: URT 4075 is a very soft non-film forming PU for polished finishings Product Characteristics: Physical state Transparent liquid Active Substance 20 % pH 8

Benefits: • URT 4075 is a polishable PU especially for full grain leathers • URT 4075 gives to the leather a good adhesion, a natural look and a full, nice touch. • URT 4075 when used in burnish articles gives more adhesion to the waxes and caseins without forming any film. Application: We recommend to use URT 4075 on any kind of article to achieve a natural look and a re-bright effect. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

URT 4097

Product Review: URT 4097 is a water dispersion of polyurethanes. Product Characteristics: Physical state White liquid Active Substance 17 % pH 8

Benefits: • URT 4097 is a ready to use top finish. • URT 4097 gives soft and matt film with a pleasant waxy, warm feel. • URT 4097 has good dry and wet resistance. • URT 4097 is suitable for upholstery, leather goods and garment. Application: In covering phase or in final lustre. Can be used in spray or roller coat. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

WAX 6012

Product Review: WAX 6012 is an aqueous wax emulsion. Product Characteristics: Physical state White Dense liquid Active Substance 15 % pH 8

Benefits: • WAX 6012 is a wax that gives re-bright effect to finishing. • WAX 6012 contributes masking of defects and grain reflection. • WAX 6012 imparts closing and re-bright effect to brush. Application: WAX 6012 can be used in all phases of finishing from 25-150 gr/lt. For aqueous Brush-Off articles: 100 WAX 6012, 200 Water, 30 URT 4075, 20 Pigment

Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C. Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

WAX 6042

Product Review: WAX 6042 is a carnauba wax emulsion. Product Characteristics: Physical state Dark liquid Active Substance 22 % pH 9

Benefits: • WAX 6042 is a special wax to obtain burnish effect on buffed vegetable re-tanned leather. • WAX 6042 it gives also the reactivity of burnish to full-chrome leathers. • WAX 6042 gives a very natural aged-effect on dry-milled nappa leathers. Application: Generally it is recommended to use with OIL 6021 in order to regulate the desired effect and softness. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

WAX 6052

Product Review: WAX 6052 is an aqueous wax emulsion. Product Characteristics: Physical state White Dense liquid Active Substance 15 % pH 8

Benefits: • WAX 6052 developed for items with burnishing effect on any kind of leather • WAX 6052 contributes a strong dark burnishing effect also on full chrome leather. • WAX 6052 can be applied by padding, roller coat or spray. Application: WAX 6052 can be used in all phases of finishing from 25-150 gr/lt. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

WAX 6708

Product Review: WAX 6708 is an aqueous wax emulsion. Product Characteristics: Physical state White liquid Active Substance 30 % pH 8

Benefits: • WAX 6708 gives a particular white effect. • WAX 6708 can be applied either on roller coat or on spray. • WAX 6708 can be applied on full grain and buffed leather. • WAX 6708 gives a very strong darkening effect and a very good closure on the grain during brushing. Application: If the whitening effect is wanted to be "turn off”, it is suggested to over spray a light aniline cross. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

WAX 6765

Product Review: WAX 6765 is an aqueous wax emulsion. Product Characteristics: Physical state White Dense liquid Active Substance 18 % pH 8

Benefits: • WAX 6765 gives a particular white effect. • WAX 6765 gives a waxy and silky touch on the leather. • WAX W gives a good dark effect with an opportune brushing on the finished shoes. Application: WAX 6765 is recommended for mould look articles. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

WAX G

Product Review: WAX G is an aqueous wax emulsion. Product Characteristics: Physical state White liquid Active Substance 10 % pH 8

Benefits: • WAX G gives a good seal and a clear glossy appearance after brushing. • WAX G can be applied either on roller coat or on spray. • WAX G is mainly used on buffed leathers, which give a pleasant burnishing effect together with a slightly whitening effect. Application: The dilution depends on the desired effect. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

WAX O 30

Product Review: WAX O 30 is a paste of special oils and waxes. Product Characteristics: Physical state Yellowish paste Active Substance 50 %

Benefits: • WAX O 30 gives a soft PULL-UP or TIMBERLAND effect on leather. • WAX O 30 can be applied either on roller coat or by hand padding. • WAX O 30 is specially designed to obtain “pull-up” effect both on snuffed as well as full grain leathers. Application: It can be roller coater applied with temperatures higher than 55°C, The leather must be milled and ironed to obtain crazy-horse effect on points. Depending on the desired hardness or effect could be combined with WAX P 100 or WAX P 70. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

WAX P 70

Product Review: WAX P 70 is solid paraffin wax with special solvents. Product Characteristics: Physical state Whitish solid Active Substance 70 %

Benefits: • WAX P 70 gives a good seal and a clear glossy appearance after brushing. • WAX P 70 can be applied either on roller coat or by hand padding. • WAX P 70 is specially designed to obtain “pull-up” effect both on snuffed as well as full grain leathers. • WAX P 70 enters to the cross section on buffed leather so gives a hard, rigid handle to leather. Application: It can be roller coater applied with temperatures higher than 55°C, The leather must be milled and ironed to obtain crazy-horse effect on points. Depending on the desired hardness or effect could be combined with WAX O 30 or other solvent based oils. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015

WAX P 100

Product Review: WAX P 100 is solid paraffin wax. Product Characteristics: Physical state Whitish solid Active Substance 100 %

Benefits: • WAX P 100 gives a good seal and a clear glossy appearance after brushing. • WAX P 100 can be applied either on roller coat or by hand padding. • WAX P 100 is specially designed to obtain “pull-up” effect both on snuffed as well as full grain leathers. Application: It can be roller coater applied with temperatures higher than 55°C, The leather must be milled and ironed to obtain crazy-horse effect on points. Depending on the desired hardness or effect could be combined with WAX O 30 or other solvent based oils. Handling & Storage:Keep from freezing, can be store for 12 months between +5 and +35°C.

Our recommendations are based on according to our experiences and observations. The customer should perform his own tests in order to determine the suitability of the products for their production routine. As Karakoç Kimya can not control the conditions of usage of the products in tannery, the consequences comes within the customers responsibility. EDITION 2015